Surface Preparation
Primer
Primer is used for priming walls and ceilings indoors before painting or plastering.
Primer is used for priming walls and ceilings indoors before painting or plastering. Its characteristics include a fast-drying formula that allows finishing coats to be applied in just 2 hours. The solvent-free formulation eases use. After drying, it becomes completely colourless, which ensures an aesthetic final result. In addition, the primer is permeable to water vapour, which allows you to maintain proper air circulation on the substrate surface. Designed for use on walls and ceilings inside buildings.
- Evens out and reduces the absorbency of the substrate
- Increases the adhesion of subsequent layers
- Single coat
Specifications
- Available packaging
- 1L
- Yield
- approx. 8m² - 10m² / l
Application technique
Step-by-step application
Surface preparation: The surface should be: - stable, sufficiently load-bearing, seasoned to an air-dry state, - clean, that is, free of dust and free of old paint layers and other coatings that may affect the adhesion of the paint, in particular dust, dirt, wax and grease, - even, without cracks; repair defects before painting.
Emulsion preparation: Primer is produced as an emulsion ready for direct use. It should be mixed well before use.
Priming: Apply Primer to the surface undiluted, once with a roller, with a brush or by spraying, in the form of a thin and uniform layer.
Use of surfaces: Painting, wallpapering, tiling, etc. should be started after the emulsion has dried. The primer should form a matte surface when it dries.
The complete system
Complementary products
Want this finish on your walls?
Send us a few details about your project and we will reply within 24 hours with a complete-system recommendation and the consumption estimate.
Request a quote