Accessories
Rust Activator
Rust Activator is manufactured on the basis of a salt solution. It accelerates the formation of the natural corrosion process on Industrial Rust plaster.
Ready to use - no additional preparation is required.
It has excellent application parameters. The Industrial Rust effect (for which we use the RUST ACTIVATOR) can be applied to walls indoors. It allows the arrangement of both modern and classic rooms.
It is recommended in particular for residential buildings and public spaces (offices, service outlets, shopping centres).
- Accelerates the corrosion process
- Easy to apply
- For interiors
Specifications
- Available packaging
- 0.5l
- Consumption
- 70ml / m²
Application technique
Step-by-step application
Rust Activator should be applied to the plaster layer using an atomizer, a brush, a sponge or plastic sprayers.
In the case of large surfaces, the work should be carried out in stages - the activator should be applied after a surface of approximately 1 - 2 m² of plaster has been created.
The application of the activator should be fairly uniform over the entire surface. The activator can be applied several times in certain selected areas to intensify the corrosion effect, in case the coating has not dried completely. Leave the entire coating surface to dry.
In application
The effect in real spaces
The complete system
Complementary products
Want this finish on your walls?
Send us a few details about your project and we will reply within 24 hours with a complete-system recommendation and the consumption estimate.
Request a quote